DuraGate SP-4100-BZ Bronze Spartan Flat Top 5′ Bi-Parting 14′ Wide Driveway Gate

We are proud to offer our latest series of gates made of mild steel, powder coated hammered bronze. Bronze posts are no longer available; if you wish to use our premade posts it is advised that you scuff the powdercoat with a scouring pad then repaint with a hammered bronze spray paint.

Outer frame is 1-1/2″ square, stakes are 3/4″ square on 5-1/2″ centers. Flat Tops have 1/4 flat bar steel for both of the second top and bottom rails. Gate weighs about 300 Lbs (14′ gate). Gate is 5′ high.

IMPORTANT NOTICE / DISCLAIMER:

— Bi-parting gate individual leaf size may vary up to 1/4″.
— We do not recommend purchasing two single gates to be installed as one bi-parting gate; height may vary up to 1″.
— There may be minor imperfections in the powder-coat finish. These will not affect the durability of the gate and if present, are not significantly noticeable.
— Before installing posts in concrete, MEASURE the gate to ensure it is square. Measure from corner to corner, then each end from top to bottom. Measurements should not vary more than 1/4″ – 1/2″.
— Gate width needs to be measured, then add 3-1/2″ between posts for a single gate or 4″ between posts for double gates. **Measurements do not apply to Cornerstone products.
— Measure All Gates Prior to Installation! Due to manufacturing variables, gates MAY vary in width by 1″ – 2”. Measure & confirm gate width PRIOR to setting posts.
— Shipping includes transporting the gate from our warehouse to the delivery address. It does NOT include lift gate service or unloading. Please be prepared to unload the gate using either a forklift with a boom or 3-4 people.
— Gates, as shipped, are designed for use as a swing gate. All gates can be converted for use as slide gates by adding wheels, track and other hardware. Call us for more information on requirements.